'Martin Style' Truss Rod 440mm - Electric guitar
'Martin Style' Truss Rod 440mm - Electric guitar
Product Code: | Guitar-1472799523 |
Availability: | In Stock |
-
$399.00
- Ex Tax: $399.00
'Martin Style' Truss Rod 440mm - Electric guitar
Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.See all condition definitions- opens in a new window or tab... Read moreabout the condition
;Instrument: Guitar
;MPN: Does Not Apply
;Brand: Australian Luthiers Supplies
;UPC: Does not apply
'Martin Style' Truss Rod 440mm - Electric guitar
Single action adjustable truss rod - Martin style aluminium casing with steel rod.
Adjusts with allen key
Total length - 440mm (17 1/2")
Width - 10.5mm (0.42")
Depth - 9.5mm (0.38")
Weight - 144 Grams
Easy to install requiring a straight slot. The strong aluminium casing
adds reinforcement to a neck. Adjustment is smooth and easy.
INSTALLATION INSTRUCTIONS
‘Martin style’ truss rods must be installed with the open taped side
down towards the back of the neck and the flat aluminium side up towards
the fingerboard.
We recommend that the slot for the truss rod be cut 0.5-1.0mm deeper
than the depth of the truss rod. A 0.5-1.0mm fillet of timber should be
used to cover the truss rod and fill the 0.5-1.0mm space above it.
The truss rod can be glued in place with some epoxy glue on the sides
and top only, then the fillet of timber is placed on top of the truss
rod and held or clamped in place while the epoxy dries.
The fillet and glue are then sanded flat to the top surface of the neck leaving a flat surface for the fingerboard to be glued.
IMPORTANT – Do not allow any glue to go on or into the open/taped side
of the truss rod or around the nut as this may cause it to jam.
'Martin Style' Truss Rod 440mm - Electric guitar
Looking 'Martin Style' Truss Rod 440mm - Electric guitar to replace your martin hd28 d28 D45 D35 d42 d41 Martin om-42 martin om-28 martin 00028ec martin 00045ec Cibson J200 Gisbon sj200 Cibson j-45 taylor 914ce taylor 918e taylor 916ce taylor k24ce Cibson es335 Cibson SG Gretsch G5420T Gretsch white falcon Squier Deluxe Strat fender stratocaster Fender Telecaster . we make a drop-in replacement for it. If you’re not sure who made the guitar just contact with us .Guitars China competes with the biggest names in the guitar Market.
Reviews (0)There are no reviews for this product.
Tags: 'Martin Style' Truss Rod 440mm - Electric guitar