• 'Martin Style' Truss Rod 580mm - Bass guitar

'Martin Style' Truss Rod 580mm - Bass guitar

'Martin Style' Truss Rod 580mm - Bass guitar

Product Code:Guitar-1472795438
Availability:In Stock
  • $399.00

  • Ex Tax: $399.00

'Martin Style' Truss Rod 580mm - Bass guitar

Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.See all condition definitions- opens in a new window or tab... Read moreabout the condition
;Instrument: Guitar
;MPN: Does Not Apply
;Brand: Australian Luthiers Supplies
;UPC: Does not apply

'Martin Style' Truss Rod 580mm - Bass guitar

 Single action adjustable truss rod - Martin style aluminium casing with steel rod.

Adjusts with allen key

Total length including nut - 580mm (22.8")
Width - 11.7mm (0.45")
Depth - 10.0mm (0.62")
Weight - 200 Grams

Easy to install requiring a straight slot. The strong aluminium casing adds reinforcement to a neck. Adjustment is smooth and easy.


INSTALLATION INSTRUCTIONS

‘Martin style’ truss rods must be installed with the open taped side down towards the back of the neck and the flat aluminium side up towards the fingerboard.

We recommend that the slot for the truss rod be cut 0.5-1.0mm deeper than the depth of the truss rod. A 0.5-1.0mm fillet of timber should be used to cover the truss rod and fill the 0.5-1.0mm space above it.

The truss rod can be glued in place with some epoxy glue on the sides and top only, then the fillet of timber is placed on top of the truss rod and held or clamped in place while the epoxy dries.

The fillet and glue are then sanded flat to the top surface of the neck leaving a flat surface for the fingerboard to be glued.

IMPORTANT – Do not allow any glue to go on or into the open/taped side of the truss rod or around the nut as this may cause it to jam.

'Martin Style' Truss Rod 580mm - Bass guitar

Looking 'Martin Style' Truss Rod 580mm - Bass guitar to replace your martin hd28 d28 D45 D35 d42 d41 Martin om-42 martin om-28 martin 00028ec martin 00045ec Cibson J200 Gisbon sj200 Cibson j-45 taylor 914ce taylor 918e taylor 916ce taylor k24ce Cibson es335 Cibson SG Gretsch G5420T Gretsch white falcon Squier Deluxe Strat fender stratocaster Fender Telecaster . we make a drop-in replacement for it. If you’re not sure who made the guitar just contact with us .Guitars China competes with the biggest names in the guitar Market.

Reviews (0)

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good

Tags: 'Martin Style' Truss Rod 580mm - Bass guitar