Carl's Custom Guitars Speaker Soak Power Tube Amp/Amplifier Attenuator/Brake/Pad

Carl's Custom Guitars Speaker Soak Power Tube Amp/Amplifier Attenuator/Brake/Pad

Product Code:Guitar-1471865601
Availability:In Stock
  • $45.00

  • Ex Tax: $45.00

Carl's Custom Guitars Speaker Soak Power Tube Amp/Amplifier Attenuator/Brake/Pad

Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.See all condition definitions- opens in a new window or tab... Read moreabout the condition
;Brand: Carl's Custom Guitars
;Country/Region of Manufacture: United States
;Model: Speaker Soak 60w
;MPN: SOAK

Carl's Custom Guitars Speaker Soak Power Tube Amp/Amplifier Attenuator/Brake/Pad

Welcome to only the only place to buy CARL'S CUSTOM GUITARS products on eBayCarl's Custom Guitars brings you:

THE SPEAKER SOAK!!!

 Achieve wide open power tube tones at manageable volume levels simply, effectively & AFFORDABLY!

True guitar amp speaker attenuator for ALL amps of 60 watts or less!

Available in 4,  8 and 16 ohm versions, choose when you add to cart

Ahhhh, the long suffering quest for that PERFECT guitar tone!  So many factors play into finding one's own signature sound, but there's one thing that we all agree on: guitar amps sound best when turned up LOUD! That is when we really start to hear all the richest harmonic overtones and feel the most dynamic response from the power tubes, in a perfect world we would always be able to run our amps wide open but sadly such is not the case so we compromise and compensate and no matter WHAT it never sounds the same as that CRANKED amplifier...well, compromise no more, Carl's Custom Guitar's Speaker Soak allows you to dial in your favorite full volume tones and then attenuate the volume (without losing that great tone!) before it hits the speakers, all the way down to safe "bedroom" volumes if need be, simply insert this device between your amplifier's speaker output and the speaker itself (out from amp's speaker output into IN on the Speaker Soak, OUT from Speaker Soak to the speaker) turn the Speaker Soak up all the way, dial in your favorite full volume sound and then rolllllllll back the volume on the Speaker Soak, preserving all that rich tone without deafening your bandmates (or driving your significant other/neighbors crazy!), a must have for any guitarist who does not have the luxury of being to run their rig at full volume all the time!

Here's one of my Speaker Soaks in action (along with some of my other products):

You must use SPEAKER cables to connect this device between your amp's speaker output and the speaker itself, I have a GREAT deal on a quality Audio Technica three foot speaker cable here:


Three Foot Speaker Cable

Carl's Custom Guitars have been in business making handcrafted guitar related products since 1998, all of my items are made (by ME!) in the USA, I pride myself on my customer service, 15+ years on eBay with well over 10000 positive feedbacks and ALL my items have a full moneyback satisfaction guarantee so there is absolutely nothing to risk here, buy the Soak, give it a shot and if it's not your cup of tea simply send it back for a refund, doesn't get much better than that!

A few very important technical notes here: simply said that volume we are attenuating has to go somewhere, in this case is converted to heat which is dissipated in the Speaker Soaks design, that said it is quite normal for this device to get warm, it is not going to fry eggs or anything but basically the more volume you are attenuating the warmer it will be so just give it a little breathing room on top of your amp or whatnot (the Speaker Soak is just 2.25x3.5x4.5 inches), if it gets outright HOT then you are definitely doing something wrong.  For example I can run my 40 watt Hot Rod Deluxe through it for hours pretty well cranked and the Speaker Soak will be a little warm to touch, this is normal. Do not use this device on amps over 60 watts and be SURE you match ohm rating of your Speaker Soak with that of your amplifier's output (in other words if your amps speaker output is 8 ohm, get the 8 ohm Speaker Soak, if its 16 get the 16), if you do not know what ohm level your amp puts out or how many watts it is try doing a Google search for your amp's specs, these things should not be overlooked.  People commonly ask if this device will harm the amp or shorten tube life etc, well basically as long as your amp is properly maintained in good working order and you use it in accordance with the guidelines I have listed here then no it will not harm your amp or shorten tube life any more than it would if you were running your amp at that more open volume level, amps are designed to be run loud at times so if you have a fully functional amp and you use this device responsibly you will have nothing to worry about, your tubes will have the same normal lifespan as they would have if the amp was running as the settings you dial in with the Speaker Soak. Once again this device is NOT intended for amplifiers putting out more than 60 watts, it is not designed to handle that hot of a signal and attempting to do so could harm the Speaker Soak or even your amplifier, I will not be held responsible for what may happen if you do so please do not even attempt it, while it MAY very well work I am in no way encouraging you to do so and you would absolutely be doing it at YOUR OWN RISK, the last thing I want is anyone harming a device I worked hard to build and/or something they paid their own hard earned money for, consider yourself warned hehe! Unlock a whole new world of tones, I look forward to doing business with you, thank you -Carl 

Please note: Carl's Custom Guitars is a one man operation, I make all of my products by hand, manage the store/shop, do all my own customer service as well as process, package and ship all items etc etc...I take pride in my customer communications, please be aware that many EBAY generated emails fall victim to spam filters and such these days so if my response never reached you this was most likely the case. Please be patient and give your a package a chance to reach you, you will receive your merchandise as quickly as I can make that happen and it will be well worth any short wait. I work very hard to build the best products that I possibly can and offer them to you at very affordable prices. I also have a moneyback satisfaction guarantee on my items so there is never, ever any reason to worry about any purchase from me, and I certainly appreciate your business. Thank you and enjoy!!!

Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application

Carl's Custom Guitars Speaker Soak Power Tube Amp/Amplifier Attenuator/Brake/Pad

Looking Carl's Custom Guitars Speaker Soak Power Tube Amp/Amplifier Attenuator/Brake/Pad to replace your martin hd28 d28 D45 D35 d42 d41 Martin om-42 martin om-28 martin 00028ec martin 00045ec Cibson J200 Gisbon sj200 Cibson j-45 taylor 914ce taylor 918e taylor 916ce taylor k24ce Cibson es335 Cibson SG Gretsch G5420T Gretsch white falcon Squier Deluxe Strat fender stratocaster Fender Telecaster . we make a drop-in replacement for it. If you’re not sure who made the guitar just contact with us .Guitars China competes with the biggest names in the guitar Market.

Reviews (0)

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good

Tags: Carl's Custom Guitars Speaker Soak Power Tube Amp/Amplifier Attenuator/Brake/Pad