RANDY RHOADS BARITONE NECK-THRU GUITAR PROJECT CUSTOM PAINTED SD JB PICKUPS

Country/Region of Manufacture: United States
;Headstock Type: Reverse 6 inline
;String Configuration: 6 String
;Fingerboard Wood: Ebony
;Model: Baritone
;Inlay: laminated abalone shark fin 12th fret
;Body Type: Roads
;Neck Pickup: Hum bucker JB®
;Body Wood: Alder body Maple neck
;Bridge Pickup: Trembucker JB®

RANDY RHOADS BARITONE NECK-THRU GUITAR PROJECT CUSTOM PAINTED SD JB PICKUPS

SOLD AS IS!
Neck-Thru Baritone Rhoads. (not a Jackson) I custom ordered this guitar from a luthier shop some thousands of years ago. Pretty much what I wanted and a satisfactory job. It's got a reverse hockey stick 6-inline bound headstock. The specs are almost identical to a Jackson RR with slight modifications on neck thickness, headstock, and body being just a tiny bit bigger.I don't play baritone anymore and I don't think I'll ever get to finishing this. This is an awesome project if you are into building and repairs and if you like Baritone guitars :) and like to use really heavy gauge strings without worrying about fret buzz and intonation problems. It's a short scale baritone (27.5") I am including a new 27.5" scale ebony fingerboard (bought from LMII) No radius / flat and 1/4" thick with black and red bindings; 43mm nut width and a 57mm heel with and the Double Action Truss rod. I am including the Seymour Duncan pickups with the guitar. (come with pickup guards and screws)Work needed:Guitar has an awesome finish (sealed with lots of clear) but was thrown to the ground and the neck broke in half when it didn't have a fretboard (READ BELOW), however it's all fixed and needs to be re-finished.The original fretboard was getting a bit dreary so I made THE biggest mistake and removed it. But that's all behind me. The neck is in a great up bow state. You need to re-rout the truss channel for about 1/16" so for the truss rod to sit in the channel and the fretboard could sit and be glued perfectly flat onto the neck. Drill a route for the wire from the output jack cavity to the electronics burial chamber. There you find two volume/tone pots and a pick-up switch. They have been literally buried since the guitar was sent for a second airbrush paint. (I had to move the output jack). Re-drill the Floyd nut holes! The holes are filled with epoxy putty. I don't remember why I epoxied the Floyd rose mounting posts but they have to be redrilled as well. From point "0" to the centre of the mounting posts is 27" if I am not mistaken. 

Feel free to ask questions or ask for more photos.No additional parts are included.
Length of the guitar 48"No hardshell case but will take extreme caution in shipping safely.

RANDY RHOADS BARITONE NECK-THRU GUITAR PROJECT CUSTOM PAINTED SD JB PICKUPS

Looking RANDY RHOADS BARITONE NECK-THRU GUITAR PROJECT CUSTOM PAINTED SD JB PICKUPS to replace your martin hd28 d28 D45 D35 d42 d41 Martin om-42 martin om-28 martin 00028ec martin 00045ec Cibson J200 Gisbon sj200 Cibson j-45 taylor 914ce taylor 918e taylor 916ce taylor k24ce Cibson es335 Cibson SG Gretsch G5420T Gretsch white falcon Squier Deluxe Strat fender stratocaster Fender Telecaster . we make a drop-in replacement for it. If you’re not sure who made the guitar just contact with us .Guitars China competes with the biggest names in the guitar Market.