Universal Piano Bass Strings - Replacement Strings

Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.See all condition definitions- opens in a new window or tab... Read moreabout the condition
;MPN: Does Not Apply
;Brand: Unbranded
;UPC: Does not apply

Universal Piano Bass Strings - Replacement Strings

Universal Piano Bass Strings

Universal Bass Strings are a good solution to enable you to replace single bass strings when you don't need to replace the whole set. There are many sizes to choose from. You would choose the diameter of wire that most closely matches the size that you need. The diameter listed is the diameter of the wound part of the string.  You can determine the diameter of the wire with a micrometer or caliper. There is 3-5/8" from the hitch pin loop to the start of the copper wrap.  Please choose from the following list of sizes and include a message with your payment or send us a message through ebay as to what size of string you need.

Sizes Available:

• S50-1: Diameter of wire: .138"  Length of wrap: 56-1/8"
  
• S50-2: Diameter of wire: .136"  Length of wrap: 55-7/8"
  
• S50-3: Diameter of wire: .132"  Length of wrap: 55-5/8"
  S50-4: Diameter of wire: .128"  Length of wrap: 55-3/8"
  S50-5: Diameter of wire: .125"  Length of wrap: 55-1/4"
  S50-6: Diameter of wire: .122"  Length of wrap: 55"
  S50-7: Diameter of wire: .118"  Length of wrap: 54-3/4"
  S50-8: Diameter of wire: .116"  Length of wrap: 54-1/2"
  S50-9: Diameter of wire: .114"  Length of wrap: 54-1/4"
  S50-10: Diameter of wire: .112"  Length of wrap: 54"
  S50-11: Diameter of wire: .109"  Length of wrap: 53-5/8"
  S50-12: Diameter of wire: .107"  Length of wrap: 53-1/2"
  S50-13: Diameter of wire: .104"  Length of wrap: 53-1/8"
  S50-14: Diameter of wire: .099"  Length of wrap: 53-1/8"
  S50-15: Diameter of wire: .097"  Length of wrap: 53-1/8"
  S50-16: Diameter of wire: .094"  Length of wrap: 53-1/8"
  S50-17: Diameter of wire: .092"  Length of wrap: 53-1/8"
  S50-18: Diameter of wire: .088"  Length of wrap: 53-1/8"
  S50-19: Diameter of wire: .086"  Length of wrap: 53-1/8"
  S50-20: Diameter of wire: .082"  Length of wrap: 53-1/8"
  S50-21: Diameter of wire: .080"  Length of wrap: 53-1/8"
  S50-22: Diameter of wire: .077"  Length of wrap: 53-1/8"
  S50-23: Diameter of wire: .076"  Length of wrap: 53-1/8"
  S50-24: Diameter of wire: .075"  Length of wrap: 53-1/8"
  S50-25: Diameter of wire: .073"  Length of wrap: 53-1/8"
  S50-26: Diameter of wire: .071"  Length of wrap: 53-1/8"
  S50-27: Diameter of wire: .069"  Length of wrap: 53-1/8"
  S50-28: Diameter of wire: .067"  Length of wrap: 52-7/8"
  S50-29: Diameter of wire: .066"  Length of wrap: 52-1/2"
  S50-30: Diameter of wire: .065"  Length of wrap: 52-1/4"
  S50-31: Diameter of wire: .064"  Length of wrap: 51-3/4"
  S50-32: Diameter of wire: .063"  Length of wrap: 51-3/8"
  S50-33: Diameter of wire: .062"  Length of wrap: 51"
  S50-34: Diameter of wire: .061"  Length of wrap: 50-5/8"
  S50-35: Diameter of wire: .060"  Length of wrap: 50-1/4"
  S50-36: Diameter of wire: .058"  Length of wrap: 45-1/4"
  S50-37: Diameter of wire: .056"  Length of wrap: 44-7/8"
  
  

Instructions for installing universal bass strings:

1. Place the loop end of the wire over the hitch pin and across the bass bridge. Line up replacement string with other strings in the piano. Measure 1/4" from the point where the windings end on other strings toward the bass bridge. Cut through the copper winding of the new string at this point.

2. Stretch the replacement string across to the upper plate bearing or agraffe. Line up the replacement string with the windings of the other strings. Measure 1/4" from the winding line toward the opposite (hitch pin) side to allow for stretch. Cut through the copper winding of the new string at this point.

3. Stretch the replacement string up to the tuning pin. Allow enough length for 3 coils on the tuning pin. Cut through the winding and wire core to remove excess length of the replacement string.

4. Be sure to cut through the copper winding with a circular motion in the same direction as the winding has been done. This will prevent the windings from loosening their grip on the core wire.

5. Remove the replacement string and unwind the copper winding at both ends up to the scored sections. Then install as you would any custom made string.   We offer combined shipping on most of the items we sell. You can put the items you are interested in into your ebay shopping cart and ebay will automatically calculate any combined shipping discounts automatically.

International Buyers – Please Note:

Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.  Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.

Universal Piano Bass Strings - Replacement Strings

Looking Universal Piano Bass Strings - Replacement Strings to replace your martin hd28 d28 D45 D35 d42 d41 Martin om-42 martin om-28 martin 00028ec martin 00045ec Cibson J200 Gisbon sj200 Cibson j-45 taylor 914ce taylor 918e taylor 916ce taylor k24ce Cibson es335 Cibson SG Gretsch G5420T Gretsch white falcon Squier Deluxe Strat fender stratocaster Fender Telecaster . we make a drop-in replacement for it. If you’re not sure who made the guitar just contact with us .Guitars China competes with the biggest names in the guitar Market.

Reviews (0)